Contact usFAQSShipping-ReturnsInternational OrdersCart ContentsCheckoutMy Account


DUAL Stage Double Valve Powerful High Pressure Burner 100,000 BT
[High Pressur]

DUAL Stage Double Valve Powerful High Pressure Burner 100,000 BT
Dual Stage Double Valve High Pressure Burner LPG
  • Powerful Dual Stage High Pressure Burner over 100,000 BTU
  • Burner can be used with single burner ring in the center or outer burner ring, for higher heat requirement you can use both burner rings at once.
  • Includes CSA Approved Hose and Regulator Easy Connect Fitting
  • Stand has wind Guard Protection Feature
  • Stand can be used on low Feature at 16.5 inches high for tall pots or convert to 28.5 inches in Height, to avoid bending over while cooking
  • This set is now sold in a separate box instead it is much easier to set up, so image is slightly different as shown
  • Stand top ring diameter is 19"
  • Stand height on low setting is 16.5" tall
  • Stand height on tall setting is 28.5"


  • This Burner is a High Pressure Burner it is very Powerful it Quickly can bring water to a Boil, Unlike Standard Burners
  • When connecting hose, no need to use any Teflon tape.
  • When you connect the hose to the tank and are ready to open the knob on your propane tank, make sure you open it slowly, so that not to much propane rushes into the regulator causing it to t freeze, where gas cannot flow through freely or none at all, . should this happen close the red regulator knob on the hose and re-open again *please note this red knob displays arrows to show you which way is On, its a reverse operation.
  • On the burner the knob on the left controls the inner circle flame and the knob on the right controls the larger outer flame. you can use both at once or you can just use one.
  • The burners best performance is achieved with the proper air mixture, it also prevents the tarnishing of your pots. To control the air mixture adjust the sprocket like washer that spins left or right, they are located behind the control knobs one on the left for the inner burner and one on the right for the larger outer burner; if this sprocket like washer is to closed the burner will be burning a bright yellow flame which is not the correct way to operate what you do is spin this washer like sprocket slowly to the open position to allow more air flow tt till the flame turns more blue, just don't go way past it that the burner turns OFF.
Quick Find
Use keywords to find the product you are looking for.
Advanced Search
We Accept
0 items
Share Product
Share via E-Mail Share on Facebook
Share on Twitter